LiFLEX IV 355 for precise mechanical machining

At a Glance

LiFLEX IV 355

4- and 5-axis configuration

(354"/s²) 9 m/s² acceleration

(246"/min) 75 m/min rapid feed

Process lubrication: dry, coolant, MQL

i-Technology by LiCON

Cubic Volume

Strokes and Interference Cubes

Grafik der Kubatur der LiFLEX IV Vierspindler

The LiFLEX IV 355 comes with strokes of (12"/20"/20") 300 / 500 / 500 mm in X / Y / Z as well as an interference cube of (39") 1000 mm in A-axis and interference cubes of (12") 299 mm in B-axis.

LiFLEX IV 355

Available Loading Options

The LiFLEX IV 355 is available as a directly loaded machine or with double trunnion.

Direct Loading

Double Trunnion

Direct loading is used when the loading and unloading times take only a fraction of the machining time.

The double trunnion is recommended for processes with short machining times and frequent changeover operations.

Discover our portfolio

Product Data

LiFLEX IV 355 in Comparison

Further specifications on request. We reserve the right to make technical changes without prior notice.

	LiFLEX IV 355	LiFLEX IV 244	LiFLEX IV 366
Axis (* Swivel head)	4 / 5	4 / 5	4 / 5
Independent axis
Spindle distance	(12") 300 mm	(9") 225 mm	(15") 375 mm
Spindle torque (max.)	(74 / 148 Nm ft-lb) 100 / 200 Nm	(74 ft-lb) 100 Nm	(74 / 148 Nm ft-lb) 100 / 200 Nm
Spindle rpm (max.)	8000 - 16000 rpm	12000 rpm	8000 - 16000 rpm
Strokes (X / Y / Z)	(12"/20"/20") 300 / 500 / 500 mm	(9"/19"/17") 225 / 470 / 420 mm	(15"/26"/26") 375 / 660 / 650 mm
Spindle (HSK)	63 / 100	63	63 / 100
Tool magazine	72 / 156	80 / 120	72 / 156
Direct loading	X	X	X
Pallet changer	-	-	-
Double trunnion	X	X	X
Acceleration (linear axis, max.)	(354"/s²) 9 m/s²	(354"/s²) 9 m/s²	(354"/s²) 9 m/s²
Rapid feed (linear axis, max.)	(246"/min) 75 m/min	(246"/min) 75 m/min	(246"/min) 75 m/min
Interference cubes (A- / B-axis)	(39"/12") 1000 / 299 mm	(30"/9") 765 / 224 mm	(39"/15") 1000 / 374 mm
Process lubrication	dry, coolant, MQL	dry, coolant, MQL	dry, coolant, MQL